...valve lash before I race again. Any help & instruction you can provide will be greatlly appriciated. Thanks, 37legend coupe You will need a variety of shims, and the valve bucket holder tool to ...
...YBR 125cc Yamaha.2006 Hi Anne The cold valve lash for your bike are intake 0.08-0.12mm and exhaust 0.10-0.14mm. You can get this and more specifications for your machine for free here. regards ...
...valve lash for 2003 Yamaha TTR 125 @ valve lash on the intake .003 to .005 inch, .08 to .12 mm,exhaust .004"to.0055 inch,.10 to .14 mm (cold engine). Hi, Betzauto for this scenario you will need your ...
...is the valve clearance for my 2005 1100 What is the valve clearance/lash for my 2005 1100 vstar? http://www.northernstarsrider.ca/techtip-1100valve.html Good info at that link. Hope that helps. ...
Question about Yamaha Motorcycles
when my 2000 yamaha srx 700 gets warm after riding 10 mins or so it looses all power u ma have tight valves when it gets hot the clearance goes away so u should check ur valve lash clearance
Question about Yamaha FJ 1100 Motorcycles
...line 4, just has'nt the same torque. please help Check the valve lash (clearances). If not enough clearance, the valve(s) could be not fully seating which would create the problem you have
valve adj. looking 4 in/ex valve lash adj. for '87gsxr 750 valve clearances for intake & exhaust are the same 0.10-0.15mm (0.004-0.006inch)
What is the valve clearance of XL 125 Honda Valve lash settings for xl 125 Honda is .002 inch intake and .002 exhaust as well.
valve tappet clearance for discover 150 2011 model If it is a f 150, they are hydraulic and do not have valve lash
...the valve lash but i am not aware about the valve clearance value. I need help on this matter. Plz sir tel me how much tapped gauge needs my descover 125cc and com tapped sounds to much plzz
63 questions posted
Usually answered in minutes!
42 Questions
44 Questions
