1982 Yamaha XJ 650 "rolls" Questions

stuck in first gear wont come out of first gear what do i do With the engine off, pull in the clutch and while rolling the bike forward or backward slowly, see if it you can shift it into neutral. If ...

How to hand crank a yamaha maxim I would like to know if I can hand crank a yamaha xj 650 engine With the spark plugs in it would be very challenging. Your best chance of trying this would be to roll ...

starts easy wont rev at all yamaha 82 virago 750 Float bowl is spotless floats set at carb body split no holes in diaphram new needles everything clean. Bike starts very easy. wams up fast ( close ...

I want to buy spur gears for my rolling mill, but I don't know the size terminology, like pitch, pitch diameter. My mills only good for quarter inch material and I want an upgrade to three eights and ...

suzuki 400 bandit carb tuning cant get bike running right keeps cutting out have replaced carbs as old rack was knackered hi worth while getting the carbs balanced cheers jay take to a garage with a ...

CYCLE STARTS FINE, FRONT WHEEL ROLLS BUT BACK WHEEL APPEARS TO BE LOCKED. WILL NOT MOVE FORWARD OR ROLL BACK. Check for failed bearings with the engine in neutral and then roll it back and forwards. ...

I have a 2007 650 Burgman when I roll it backwards its difficult to roll Make sure the motor is off, then try rolling it. Check out this forum: ...

bike rolled over slow before starting this year starter gave me problems last year,put in new brush and it worked fine.this year rolled over slow but started.went to work and battery died had to roll ...

2002 yz 125 when I put it in gear it will shut off acts like the clutch is not working when I adjust it on the handle bars it slips Mechanical issue: clutch not disengaging completely... engine off - ...

put motorcycle in gear bike still rolls Clutch could be way out of adjustment or at the extreme your engine compression could be so low that the bike could roll in gear.