...? Thanks Franco The exploded view diagrams on the site link below will show position orientation of stator assembly. The coil bar is bolted into position. There should be a line to indicate optimum ...
...of the rotor. Use a timing light to align the timing mark on the rotor with the "T" mark on the stator. Loosen the bolts that secure the stator plate in place. Adjust the position of the stator ...
Question about Motorcycles
have a rd125lc stator plate neutral wire beared out .now bike runs at high revs cdi box nacard .got new one same problem Stator shouldn't have any bearing on throttle speed. Stator does 2 jobs. 1 it ...
...timing on the 2 stroke gas gas (05 EC300)? I can't find any reference marks on the engine or the stator backing plate. Reply With QuoteIf you have the larger 2K-3 ignition the stator has an insert ...
Question about Motorcycles
does the stator plate need to be turned to the marks and my coil is grounded do i need another ground It is impossible to answer your question without knowing the YEAR, MAKE, and MODEL of your vehicle
stator repair I need to replace my Stator on a 1998 ST2 from what I am reading I should not be surprised. I was going to take it out and either rebuild it or get one off of Ebay but at first glance it
Question about Motorcycles
which mark is the far side mark on the stator plate on a 1997 kx 125 the top or bottom Rotating the stator counter clockwise will advance ign while clockwise will retard it.
...timing can not be changed. Please give a "very helpful" rating on this answer. Thanks :-) the stator and flywheel each have a timing mark located on them, connect a timing light to the plug
73 questions posted
Usually answered in minutes!