1981 Yamaha XS 650 H "wont start clutch" Questions

...wont start its tryin to i just put in a new pamco ignition but it still wont start but i did notice that the clutch is stuck will this effect the bike starting No it will not affect the starting so ...

wont start sometime when you pull clutch handle you half to pull and release clutch lever in & out sometimes alot to get it to start. look for bad safty switch on clutch lever two wires disconect ...

...wont disengage but shifts fine runs good ,can disengage it while rolling down hill or push start but not out of N i was told maybe nut came loose in the clutch housing Without power to the clutch and ...

...wont start even on a roll start when in gear it feels like the clutch is half working i can still kick and scange gear the clutch plates and friction plates are getting worn, or your clutch cable is ...

...stuck in 2nd gear wont start engine flooding Stuck in 2nd? Is your clutch slipping? When you have the clutch pulled in, and you try to start it, does the bike surge forward? If so, adjust

...wont start if in gear Sounds like the clutch switch is failed. Try pulling the wires off the clutch switch(on the handlebars by the clutch lever) and connect them together with a paperclip. If the ...

wont stat in gear with the clutch engaged? All the Japanese bikes I have owned won't start in gear unless you pull in the clutch lever. There is a small plunger switch fixed to the clutch lever stock

...wont start smells rich it wants to start but wont also the clutch dose not have to be pulled to start and feels like if it did start it would be in gear without pulling clutch rewaork the carb clean ...

...clutch wont engage. My clutch lever gave out. And i tried starting my bike and heard a popping sound in the case. the clutch lever wont engage. i tried tightening and loosening. There was a lot of ...

...wont start bought new battery, still wont start. could it be the starter or a loose ground wire It could be bad starter or a loose connection. Another thing to look at are the safety switches. Do you ...