1981 Yamaha XS 400 Special "led signal light bulbs work" Questions

led turn signals to work on my 81 xs 400. Any way to bypass and make work? You will need to get a resistor for the lights as the Yamahas will not work/flash without the proper resistance in the bulbs.

...LED bulb you install on a turn signal circuit.Apr. 11, 2012 ...

...LED signal lights into the stock signal lights i know it sounds crazy but what i have figured out is that it uses the stock bulbs like a fuse. all you have to do is take the headlight out just like ...

...LED bulbs intended for turn signal use have them, ones for brake lights etc don't. PS: I think the brake/ running light bulb is an 1157, dual filament. I haven't had to replace that one yet though so ...

led turn signal lights for my yzf600 and they work but dont blink and also they turn off my front turn lights. i took out the indicator signal bulb and it still did not work you need to get a relay to

...bulbs and not LEDs, they should have 2 elements, and 1 of the elements might be burned out. As far as the brake light not working from the rear brake pedal, it might be the switch itself, or a wire ...

...light work fine but can't get turn signals to work at all.Checked and have power to signals but can't get them to work. That's because the LED bulbs draw so little current the flasher relays doesn't ...

...led break light and led rear turn signals. The stock front turn signals are currently off the bike but even when I plug them in they still don't work. Also when my steering column is in the locked ...

led bulb in the instrument panel and suspect this may be the problem? to little resistance in the circuit maybe? indicator warning light flashes when left side is activated but doesnt flash when right

...LED lighis, buy a 12 Volt turn signal flasher that is made for LED's--eBay has them. If you choose turn signals with incandescent bulbs (the traditional type), be sure each bulb draws 16 or 17 watts ...