1980 Yamaha XJ 650 "adjust cam chain tension" Questions

...adjust timing chain on a yamaha 650 seca? On the back of the cylinders is the cam chain tensioner. Find the timing marks for the motor and set the motor to top dead center (TDC) on the compression ...

cam chain tension and how to set it . There is some cam chain noise at low engine rpms. bike is a 1982 maxim 550 Yes, it is the cam chain tensioner. With the engine off, just loosen the tensioner lock

...How do I adjust the tension on my cam timing chain Yamana1980-XJ650 Maxim in line 4 cyl. replace. and when you replace, also replace gears, as a new chain will eat up the old gears, and

...cam chain on my 1982 650 maxim Pop the cover off, turn the rotor until the C mark is aligned, Then loosen up the 12 mm nut that is on the 10 mm headed screw. Then loosen up the 10 mm headed screw. ...

...adjust timming chain on fz600 1986 and if there are any torque requirments Most likely you have anautomatic cam chain tensioner, which cannot be tensioned, and the only remedy is to replace the cam ...

...Cam chain tensioners pretty sure its the cam chain tensioner springs. lost their spring If its been making this noise for a while what else would i need to replace. cam chain? tensioner springs? cam ...

...of the bike you may need a new cam chain. There is nothing to adjust so you need to just figure out if the chain is stretched , if a guide is broken, or if the tensioning mechanism is

cam chain type noise. could this be a worn cam chain tensioner . the bike has covered 36000 miles it can either be a worn tensioner or need for a valve adjustment. if you rev the engine and noise goes

Cam Chain Bike is a 1996 ZX6R. Cam chain is very noisy. Removed tensioner and it seems to work fine. I saw manual adjusters on ebay. Is there more adjustment in a manual one? Could I get the seaon out

...adjust cam chain tensioner in kawasaki EN 500 1992, if not is it possible to fit manual cam chain tensioner. no, it is automatic adjustment only, once it has reached it's end, you must replace the ...