Clutch push rod will not depress to engage 71 Yamaha 360 RT1. The clutch push rod will not engage. I have removed the side plate and tryed to engage the rod by pushing in with a lever. the rod will ...
...clutch push rod Try to adjust the play in the cable at the clutch perch, leaving play in the cable. If that is ok, then check the push rod adjustment if it has one. Bottom out the push rod screw and ...
...clutch hub. On the outside of the hub there is an 12mm nut locking down a 6mm adjusting screw, the screw is adcually the first source of adjustment on initial assembly. Let me give you the breakdown ...
...adjusting it from lever adjustment to the bolt of the sprocket cover push rod mechanisme... ! I need somoeone to explain me how could i get everything back to normal? thank u Drain the oil and Pull ...
Question about Yamaha DT 360 Motorcycles
...clutch push rod, missing push rod ball bearing or push rod, worn out actuator shaft cam, Missing friction disk (5), or pressure plate (4), totally worn out friction disks, clutch plates not installed ...
...seems to work ? I'm confused by your question. Do you mean when you pull the clutch in it won't DISengage? Did you adjust the clutch push rod at the center of the clutch pack, or just the
54 questions posted
Usually answered in minutes!
90 Questions
27 Questions
