2008 Triumph Rocket III "timing chain replacement miles" Questions

...been covering atleast the parts cost for similar repairs and they have an upgrade kit that addresses tranmission issues, a replacement lower timing chain gear, timing chain adjuster and other

...chain guard. I don't have the time to get a replacement cotter pin to attempt adjusting it myself. So I have four questions: 1) How much should it cost for a shop to adjust my chain? 2) How does this ...

...miles out of a chain and if you keep it adjusted you can get 2 chains to one set of sprockets. Dealers try the BS of not running a new chain on old sprockets to make more $$$$$$. So if your sprockets ...

...timing chain on a 04 Honda rebel. I have tried and tried to get someone somewhere that knows how and just can't find anyone. [email protected] The cam chain is a endless chain. You will have to ...

chain every 200 to 500 miles, depending on how hard your bike is ridden and the conditions it is operated under. Chain lubes available at your local motorcycle shop are far superior to using any other

...miles and chain wasn't new when I got the bike about 15 months ago. The sprockets are not BADLY worn. I fitted a Scottoiler 7 or 8 hundred miles ago..........Do you folks think I need a new chain and ...

...timing chain i almost never really abuse the bike. how long should the timing chain last problem i now live in the dominican republic so no factory dealers or mechanics here i have to do the work ...

...timing chain whine maybe? I don't know. Do chains wear? It has 18,000 miles if the whining goes away with the more gas you give it, you deed to replace you cam chain tensioner. if the noise stays or ...

...for 20,000 miles with no adjustment needed wanting to know the orginal length on a cam chain for a kawasaki bayou 400, in inches,and how to measure it,and the wear on limtis on the cam chain as

...timing chain, higher pitch gear noise. sounds like timing chain, it's a higher pitch gear noise. 80,000 miles on bike, I recently purchased. I have no manual, and I'm smart enough to do the work ...