Question about Triumph Sprint ST Motorcycles
...brake, use a screwdriver to spread the gap between the pads( to make room for the new pads to fit on the disk...do not do this with the new pads you will mess them up) remove the 2 allen screw pins ...
...the weak lever. Remove caliper from the fork leg and clean pistons with a brake cleaner. Spread the pads back apart and reattach caliper to the mount. Pump the lever and you should be good to
...spread enough to reinstall. Then pull the two smaller bolts from the caliper and the pads will fall out. The pads are different for inside and outside, so pay attention, and remember, after ...
Question about Triumph Sprint ST Motorcycles
...the brake pads to spread them open, or you can remove the brake pads and use a pair of channel lock pliers to squeeze the pistons back in to the caliper. Hope this helps and please leave
...spread the front brake pads. Make sure you get the speedometer drive tang in the hole on the front disc if you have a mechanical speedo drive. To change the rear brake pads, remove the two bolts that ...
Question about Triumph Sprint ST Motorcycles
...Spread the pistons with some bent in half heavy cardboard so you don't mar the faces, then install the new ones. Hi, you need a set of tork keys. (like allan keys but with more edges). Some dot 5 ...
Question about Triumph Sprint ST Motorcycles
...brake pads in the Front Caliper and "Spread/Open" them up and put the Front Caliper over the Front Brake Rotor and Install the Two Bolts and Torque them to 25-30 ft. lbs. That Should take care of it. ...
Question about Triumph Sprint ST Motorcycles
...spread the brake pads and start the rotor up betweent he pads. Insert the speedo drive unit back into the wheel with the drive tab of the unit properly aligned in the slot of the wheel. Lubricate the ...
19 questions posted
Usually answered in minutes!
44 Questions
9 Questions
11 Questions
8 Questions
8 Questions