2001 Triumph Triumph Bonneville "don" Questions

...to get round when wet is to spray wd40 on the leads and coil, it should start straight away. But, don`t spray ignition sealer on until it is totally dry. Hope this ...

...were it will start, run a few minutes to warm up engine. Turn mixture screw all the way in, don't screw hard in (Gentle) could damage screw seating, listen to engine when it starts to ...

...sparks plugs,and wires because i had bad gas and not getting the rpms when i hit the throttle I don't know much about those bikes because I don't own one, start taking pictures of

how do i remove the carb from my 1995 honda shadow vt600? if you don't know how to move it. don't try your self. because it's more complicated to repaire it. take her to an expert... Live ...

hotwire pocket bike my pocket bike is not working at all. I don't have a key and the accessories don't turn on when i use a jumper what should i do? put a needer in the red and green or black

Where can I find the starter on my 02 honda shadow? Don't wanna tear apart the whole engine if I don't have too lol just follow the hot side battery cable and it should lead you to the starter

chain torque settings Have adjusted my chain but don,t have a toque wrench. Does any one know the settings. I don' t have a torque wrench either, and I adjust my chain on the road, with a big ...

the bike has power, but the turn signals don't turn on, it doesn't even acknowlegde that im pushing the indicator switches. Contact me directly at [email protected] and I'll send you a ...

...piston.  If it is stuck, use a mild solvent like WD-40 or gasoline to break it loose.  Don't use carburetor cleaner, it will ruin the vacuum piston diaphragm at the top.  Drain ...

...must be changed.But the original cost 300 euros.I bought the motorbike before 4 years cheap and i don't want to spend so much money. They don't give crank kits away, plus the labor is ...