2007 Suzuki Boulevard "2006 c50 getting" Questions

...2006 Suzuki C50 sticks on 3 or the shifter on my 2006 Suzuki C50 sticks in 3 or 4th gear on the down shift occassionally. I have applied Suzuki Moly paste to the sleeve bearing but it happened again. ...

...C50 I ride a Vulcan 2000 The S50 has get up and go. I was surprised. They are still carborated. And the front brake disc has no holes in it, so it's noisy. The noisy front brake is the most common ...

...2006 boulevard c50 and the rear marker lights aren't working the front markers are still working, signal lights all work as well as the hazards but yet i cant get the markers to light up even though ...

...out a rear taillight on c50 2006 model THERE IS THREE BOLTS UNDER THE REAR MUDGUARD (FENDER) THEY ARE DIFFICULT to get at. once they are removed the tail light unit will pull forward. hope this

2006 Suzuki Boulevard c50. Main 30 amp fuse blows as soon as the start button is hit. sounds like the starter is shorted out or the bike was tried to start when battery was near dead and the starter ...

...C50 engine dies 2006 Suzuki Boulevard C50 has started running 'rough' suddenly (in November). When started everything is fine, but after the engine warms up, it dies. As long as you keep pressure on ...

rear splash guard for suzuki boulevard c50 need a new splash guard. Where can I get one? ebay

get a loud clatter at high rpm's Loud chatter at high RPM could be valves or big end bearing, piston slap is generally more noticeable at low RPM.

...fluid do I use 4 a 2006 suzuki c50 boulevard motorcycle call your service dealer and get the recommended oil for this anything but recommended oil may have serious effects on the clutch ...

2006 Suzuki Boulevard C50, and need to know how to set the digital clock on the odometer. Where can I get a free copy of the manual? Select Clock Press and hold both buttons at the same time until the