Question about Suzuki GSX 1300 R Hayabusa Motorcycles
my low and high beam headlights both are not working the fuse in the fuse box on the left hand side are both good change the bulbs!!
Question about Suzuki GSX 1300 R Hayabusa Motorcycles
...working (brakes+lights) check the wires.For the turn signals, override the flasher relay.If they are coming on then you need to replace the relay.If not then check the left hand side clip on
Question about Suzuki GSX 1300 R Hayabusa Motorcycles
...left hand side of the road. The resul being that the headlight deflection is onto the on comming traffic based on our roads. Have you come up with similar problems? Please e-mail me ...
...left hand headlight is on low beam, and stays on all the time on low beam. When full beam is used the right side headlight comes on on full beam. The right side headlight has a 3 prong bulb and the ...
Question about Suzuki GSX 1300 R Hayabusa Motorcycles
...left hand control to wire up on a older bike,,,,, hooking up trun sigals and head light control,,,,what color wires go to what????? hand control off 1901 honda goin on to 1974 cb 750 with no wireing ...
...left hand side is on but when i put the brights on the right hand side comes on..,and the other night the left hand side one also died but came back on when i put the ignition off and on again,any ...
...hand up behind the headlight and remove the electrical connector, undo the spring clip and remove the old bulb. Installation is in the reverse order, but be careful not to touch the bulb glass with ...
Question about Suzuki GSX 1300 R Hayabusa Motorcycles
...on one headlight receiving .5v Check your left hand control switch for normal operation and your high beams relay and the harness for shortcuts.Assuming that your battery and charging circuit are
Question about Suzuki Motorcycles
...left hand. There should be a large rocker switch above the indicator switch. Can you comment below with photos of the controls? A simple test is to try all of the switches on the handle bars. You ...
...hand one the LEFT/RIGHT angle, however, I cannot turn them. Are these the correct adjusters and which way should I turn them and with what? Many thanks in advance! I had the same problem. I'm doing ...
76 questions posted
Usually answered in minutes!
41 Questions
25 Questions
22 Questions
22 Questions
15 Questions