...both carbs' idle speed evenly. If you have throttle bodies: http://www.bikebandit.com/2005-suzuki-boulevard-c90-vl1500-throttle-body/o/m147639sch506971 Part # 14 should adjust the idle speed on
Question about Harley Davidson Motorcycles
Set idle speed between 900-1100rpm. Don't be tempted to set it lower to get the kool Harley idle. The twin-cam oil pumps do not pump enough oil at low idle speeds. Setting for 600-800 MAY cause engine
Question about Suzuki Boulevard C90 Motorcycles
...set the idle speed at 1000 rpm or so. Turning the screw clockwise increases the idle speed. If you engine is fuel injected, you'll have to take the bike to a repair shop to have the idle speed ...
Question about Suzuki Boulevard C90 Motorcycles
...idle speed is set too low. If the engine is equipped with a carburetor, the idle speed stop screw is located at the top right of the carb. If it's fuel injected, the idle speed is set ...
low idle How do I adjust the idle? mixture is non adjustable but idle speed is. located under the carb near the breather cover on the right hand side is a knob that will turn to set idle speed
...set the idle speed a bit higher. If you're still running the stock carb, remove the air cleaner cover. You'll see a square looking plastic top on the carb. Just to the right (toward the front of the ...
Question about Suzuki Boulevard C90 Motorcycles
...set the idle speed to 950-1050 RPM using a special CARBURETOR IDLE ADJUSTER and tip. Turn clockwise to increase idle speed and turn counterclockwise to decrease idle speed. The throttle stop screw in ...
...set the idle speed. Start the engine and turn the knob until the idle speed is felt above your throttle setting. Now set the idle speed with no throttle and you feel it is about right ( 500-600 rpm
...is fuel injected, you can't adjust the idle speed, it's set electronically and you must take it to a dealer or a shop with the "break out box" needed to adjust the idle speed. Good Luck ...
...have to take the air filter cover off to get to it. If the engine is fuel injected, you'll have to take it to a shop that can set the idle speed as it is controlled electronically. Good Luck ...
286 questions posted
Usually answered in minutes!
16 Questions
8 Questions
2 Questions
0 Questions
0 Questions