Question about Suzuki Boulevard C50 Motorcycles
seat. The tensioners have been subject to fail- not universally, but it does happen- and that will be more of a knock from the side case that a rattle. The tensioners are self-adjusting until worn out
Question about Suzuki Boulevard C50 Motorcycles
Valve adjustment? Can my valves be adjusted or are they self adjusting? I am hearing different stories. Help to adjust the valves on the vn you need to change the shims.
Question about Suzuki Boulevard C50 Motorcycles
...self-adjusting or do they have to be manually adjusted? Is there a DIY manual that I can download for free to solve this problem? Is this a common problem for this type of motorcycle or is it unique ...
...valves They are hydraulic lifters and need no adjustment unless internal engine work was performed. They are set from the factory and rarely need service. If you have a loud "tick" and a pushrod is ...
...self a 2005 kx250f was runing fine one day and now i cant start it changed air filter spark plug and cleand the carb it back fies alot The valves probably need adjusting. This should be done ...
...self adjusting). Chances are the valves are wearing in, the gap is too wide, and just need to be adjusted back to the correct clearance. Worst case scenario the cam chain tensioner has ...
...self adjusting. They have a tensioner that takes up slack as the guides wear and the chain stretches. You may be able to get away with new guides if your chain isn't too stretched. Look for pieces of ...
Question about Motorcycles
...self adjusting unless its very slack its probably ok ,if it is very slack the adjuster may be stuck or the chain may be badly worn,also check the valve timing is still ok if the chain is ...
Question about Motorcycles
...self adjusting but can you remove cover to inspect without removeing engine? 1984 CB700SC Hi it is possible to remove the rocker cover with the motor in place. But dont go there unless you have to ...
...valves and cam chain tensioner if not self adjusting, replace the exhaust gaskets next, and if that does not fix it, replace the cam chain tensioner. Hope this helps. you probably need a valve ...
359 questions posted
Usually answered in minutes!
21 Questions
12 Questions
10 Questions
4 Questions
0 Questions
