2005 Suzuki Boulevard S40 "cable" Questions

Replacing the throttle cable instructions please turn off the fuel remove hoses & tank loosen throttle cable adjustment at the grip & at the carb then twist throttle cam wher its fitted & ...

...Failed alternator/generator and or voltage regulator. 3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the ...

...is "FAULTY" or corroded. 4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable ...

How to adjust clutch on a 2005 S40 Suzuki Boulevard ? Adjust the cable to the lever. Leave about 1/32" slack measured at the contact point of the lever and it's mount.

...and to the left as you simultaneously pull up), and disconnect the gauge harness and speedo cable. Obviously you need to disconnect the fuel line from the tank too. Now remove the left head ...

...be charged whilst still in the bike ,2or 3rd gear as a push start is best ,you can use a jumpstart cable from a larger battery but this can cause problems with other electrical parts so proceed with ...

just wedged onto. When the tank comes free, you still need to disconnect the harness and the speedo cable underneath

I need to replace the push,pull throttle cables on my 1998 1500 suzuki intruder, any help? Jim It's not too hard of a job. loosen your throttle cable ajustments first. you may find it easier to remove