...mark on the fly wheel. When you see this mark come around, look up at the cams. There should be two punch marks on the cam gears that line up with the gasket surface towards the outside of the head. ...
...on the flywheel...little help?? think most bikes time from the statas plate behind fly wheel , bikes ive worked on have a woodruf key and the flywheel slides on that to stop fly wheel spining on ...
...fly wheel has three hash marks on it and I do not know which one to use in the inspection hole. Two of the lines have two line between them and one is just a single line. Which mark should I go by. ...
...GL. pl advise relation of mark T on fly wheel with respect to O mark on the cam gear , when engine at TDC firing http://www.manualz.info/ you can try here for a manual to help you hope this ...
...mark on the fly wheel to the inspection mark on the inspection plug hole then with both intake and exhaust cam lobes facing outward of the head aline the dots on the cams as best as possible to the ...
...thing IS a 2 stroke, right? if its out of time there is a timing an firing marks on the fly wheel ur piston has too be too the top of the jug an u line them marks up with the marks on the timing ...
...mark on fly wheel to be visible within the marks on the inspection hole of ignition cover (always a good idea to cross reference TDC by probing the piston through spark plug hole as I have seen many ...
...fly around until you can see the (i) mark stamped on the flywheel line up with the marks on the inspection plug hole (engine case) good idea to probe the cylinder through the spark plug hole ...
...fly wheel. Align a mark that looks like this ( 'T ) to the notch in the threads. WARNING MAKE SURE THE BIKE IS AT TOP DEAD CENTER COMPRESSION! Do this by looks through the spark plug hole and make ...
...mark on the fly wheel lines up on both strokes, sorry if its hard to follow, I was trying to adjust my valves and I dropped a shim, thought it went down by the fly wheel, but still cant fine it. Y ou ...
96 questions posted
Usually answered in minutes!
67 Questions
0 Questions
2 Questions
1 Questions
