...chain correctly to over head cam. actually there is a mark to be followed . there is a mark on the over head cam , and there is a mark on the gear where you will place the chain . Now set the mark ...
...cam chain tensioner on a DR200? This is a trick question. You are fortunate to have an automatic cam chain tensioner on your motorcycle. No maintenance id=s necessary. If you are experiencing a loud ...
Question about Suzuki DR-Z 125 Motorcycles
...cam so the chain is off now. With your piston @ TDC (top dead centre)(check the timing marks) all of your cam lobes should be pointing as far away from the valves (or rockers) as possible. ...
Question about Suzuki DR-Z 125 Motorcycles
...cam chain tensioner , depends where you removed it from ? make sure that was all that came out and replace it , then carefully crank engine over slowly and listen if ok ! as long as you didnt move ...
Question about Suzuki DR-Z 125 Motorcycles
...cam chain needs adjusted... not sure on how to do the adjustment on that model though... should be very easy though.. look at a manual and in a turn of a wrench and or screwdiver its an easy
Question about Honda Motorcycles
...cam chain is worn/stretched, it needs to be replaced. Here is a direct quote from the manual: "Measure the amount of the cam chain tensioner projects as shown (there is an illustration). Replace the ...
...Cam chain tensioners pretty sure its the cam chain tensioner springs. lost their spring If its been making this noise for a while what else would i need to replace. cam chain? tensioner springs? cam ...
cam chain on 09 CRF 450. It seems that I don't enough slack in the cam chain to fit it around the camshaft sprocket. check that the new cam chain is roughly the same length as the old one, ensure that
Cam Chain Bike is a 1996 ZX6R. Cam chain is very noisy. Removed tensioner and it seems to work fine. I saw manual adjusters on ebay. Is there more adjustment in a manual one? Could I get the seaon out
...cam/chain tensionor has gone bad, is it possible that the chain is just not lined up properly and just needs to be "re-aligned"? how easy is it to replace the cam chain tensionor? from what i have ...
61 questions posted
Usually answered in minutes!
16 Questions
11 Questions