...the fuel may have gone off and fouled the spark plugs.sounds like you will need to fit new plugs,and also listen to make sure you can hear the fuel pump run when yoiu turn on the bike. hope this ...
Question about Suzuki GSX-R 600 Motorcycles
pump and that wasn't it .. and wen you put it in dealer mode it doesn't throw any codes..??? G'day. I can't solve this(there are litaraly hundreds of things it could be) BUT I can give
pump circuit to imobilise the bike, check the switch fitted to the stand is not sticking when the stand is up, also check the pump wires inside the connector for corrosion or broken contacts, the fuel
...pump was under the cam chest facing towards the front of the bike. A metal line ran from it to the oil filter and another line ran from the oil filter back towards the tank. The line changed from a ...
Question about Suzuki GSX-R 600 Motorcycles
pump not priming Bike ws fine last year nit sure what to do Bike was fine and since new battery only started once Sounds like the pump could be faulty or the fuse for it blown? Check fuse first, if ok
...this is designed to cut the fuel when the bike is involved in an accident. (it cuts power to the fuel pump) there was a recall on some switches fitted to the YBR125 you may have the same
bike will turn over but will not start. if you pour gas on air filter it runs for a few seconds. is there a way to test the fuel pump and or tell if injectors are getting fuel. Make sure the fuel line
...pump it starts good run good up to 9000 rpm we had the bike on a dunno and fit a fuel pressure gauge and the fuel pressure is 2 bar bat when the bike reach 9000 rpm the pressure falls to zero bat the ...
Question about Suzuki GSX-R 600 Motorcycles
pump up about 1/3 of intended height. At that point pedal feels soft and lift won't rise more. What are you talking about, the bike or the bike lift? If your hydraulic bike lift is doing what you say,
Question about Suzuki GSX-R 600 Motorcycles
...pump with the bike. If not, you can get one at your local dealership or order an aftermarket pump. It usually takes somewhere around 5 psi for most people, I think. The reason I think is that I've ...
88 questions posted
Usually answered in minutes!
165 Questions
108 Questions
69 Questions
61 Questions
52 Questions