2004 Suzuki RM-Z 250 "put back seat down" Questions

Ad

Question about Suzuki RM-Z 250 Motorcycles

1 Answer

...the gap on the new plug with a wire gauge. Carefully put the plug back down in the hole with the plug in the socket. Screw in with your fingers til it's hand tight. Tighten 3/4 turn with the

Ad

Question about Suzuki RM-Z 250 Motorcycles

1 Answer

...put these two screws back in the same hole they came out of. IMPORTANT > do not tighten these two adjusters down. Only screw these in until they LIGHTLY seat. Now turn each adjuster one and one half ...

Ad

Question about Suzuki RM-Z 250 Motorcycles

1 Answer

...put the seat cover back on it will not show the lines where the gel is at. put your seat cover back on and start on the sides of the seat 1 #2 and #3 put a staples in 2 3 there start ontoward 4 the ...

Question about Suzuki RM-Z 250 Motorcycles

1 Answer

...Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised ...

Question about Suzuki RM-Z 250 Motorcycles

2 Answers

...Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised ...

Question about Suzuki RM-Z 250 Motorcycles

1 Answer

...are revealed. the front of the seat is not bolted it just slide out. when you put it back on, put some white lithium grease on the front seat attachment fork piece to eliminate rubbing/squeaking ...

seat back on, finding fuel switch & kill switch Just need the simple instructions on putting my seat back on. Simple, but not to me, its been years since ive toke it out 4 a spin. I can either get

Question about Suzuki RM-Z 250 Motorcycles

2 Answers

...put ur hand behind it and you will find a lever push it down and the seat will move towards the back of the bike and the seat will come off!! the lever will only move with the helmet clasp open! hope ...

Question about Suzuki RM-Z 250 Motorcycles

2 Answers

...lift the seat off the2001 125nsr you put the starter key in the seat lock /under the back left side of the seat / turn the key and pull down the lever / then you can pull the seat back to remove it

...put on the seat of a 2003 buell lightning XB9S motorcycle just need the simple instructions on putting my seat back on. Simple, but not to me, its been years since ive toke it out 4 a spin. I can ...

Not finding what you are looking for?
2004 Suzuki RM-Z 250 Logo

93 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...