Question about Suzuki GSX 600 F (Katana Motorcycles
...bike has a four-stroke compression engine and won't start, release the compression valve and try starting it again. Sometimes, the engine remains in a compressed position and cannot turnover until ...
my katana started and ran fine last night, i put it in the garage and after work today i tried to start it, it started fine, i went inside while it was warming up. when i tried to move it, it shut off
Question about Suzuki GSX 600 F (Katana Motorcycles
94 Suzuki Katana 600 electrical problem The key doesn't turn the power off anymore so I installed a kill switch on the negative battery cables. Everything worked fine for a few months, then it died at
repair ignition system? it just stopped working. my bike dont do anything when I try starting it Start with the basics ... battery OK? Solenoid OK? Wires all clean and tight? All the safety swiches in
Question about Suzuki GSX 600 F (Katana Motorcycles
05 katana start button wont start bike but bike will push start Well sounds like start button is not in contact or stuck, if you can open the 2 screws holding the switch box together on handle bar ...
katana died with full charged battery i went to start my katana and it fired right up i rode it down the rode and around the block on the way back it died i tried to start it battery was dead so i ...
...choke on to start it up. once it starts i have to adjust the rev limit. when i rev it up after just starting it will cut out. when it is warmed up the rpm will stay around 5000 rpm then shoot up to ...
Have a suzuki 660 EFI in a cushman truckster.Engine stalls,sometimes backfireing first,will not start right away,cranks but will not start.Leave it sit for 3-5 minutes and it will start back up.Have ...
2004 Susuki Katana 600 - won't start bike won't start, no power to intrument panel or headlights. Tried to jump start from my truck. check battery connections,check main fuse
Question about Suzuki GSX 600 F (Katana Motorcycles
...it out and charged it up. put battery back and hooked it all up. now motorcycle will not start. the starting motor runs but the rpm don't move and the engine will not turn over. i have tried push ...
37 questions posted
Usually answered in minutes!
91 Questions
56 Questions
52 Questions
49 Questions
43 Questions