2003 Suzuki RM 125 "motorcycle lurches put gear" Questions

put it in gear the clutch doesnt work t jst crunches into gear Adjust the clutch cable to allow about 1/4" free play at the end of the clutch handle. Don't put the bike in gear until the rpms are near

...forward when put in first gear Lurches forward when put in first gear from neutral Your clutch is not fully engaging. Tighten your clutch cable if too loose. Bleed the system if it is

...put it in gear. When i don't have the cluch engaged it lurches foward slightly then shuts off. Check the side stand kill switch. Broken, loose or out of adjustment it will kill the bike when put in ...

lurches forward when put in first gear from neutral Readjust cluch it's not disengageing.Adjusting cable at clutch lever should do it.

...neutral dies when put it in gear Suzuki GSX Motorcycle Forums... Stalls when put in first gear Suzuki GSF600Y 2000 Service Manual OEM Parts for Kawasaki http://mybikemanuals.com/suzuki Clean fuel ...

put in gear, could by kickstand switch, but could the clutch need bleeding? Hi Unlikely that the clutch needs bleeding unless she lurches forward when she dies It will be side-stand, clutch or neutral

...put in new oil 'how can i sepeate the plates i am told they are sticking runs like s dream still but lurches when putting in gear and stalls unless i roll away any suggestions appriciated i ...

...put into gear Does it lurch forward a little? If so, First thing to check is the cable adjustment. As you pull on the clutch lever, you should be able to feel a little free play before the lever ...