Question about Suzuki RM 125 Motorcycles
...of the system to make the epoxy stick. If you go to Autozone tell them that you need an epoxy for forged aluminum. That is what the case is made of. It is best if you can epoxy both sides of the
...aluminum housing on the leg on the left hand side directly below the motor. Cant tell what might have used to be there....Can see the drive shaft,,, was there a vent hole there? exhaust? or can i ...
Question about Suzuki RM 125 Motorcycles
...aluminum. If it is on a cover, replace the cover. The best fix is one of the steel epoxy tubes you find in any hardware store. They work great and you can attach the broken piece back on or if it is ...
Question about Honda Motorcycles
...aluminum.. so the oring will seal well. Do not use any rtv/silicon, this is a low pressure system and good viton orings will last years - Unless you have a crack in which case sand around the area to ...
...or cast iron? Usually pot metal, acts like aluminum, but worse. One option would be to epoxy the damaged bowl, then line the inside with gas tank liner. I expect you would brush the internal
440 questions posted
Usually answered in minutes!
42 Questions
35 Questions
1 Questions
2 Questions