Question about Suzuki DR-Z 125 Motorcycles
...cleaner. Don't mess with throttle or air screw settings. clean the float pin then re-install it. It would be a good idea to install an in-line fuel filter when you get a chance. If you want to see an ...
...cleaner and put back together blow all airs out with compressed air. When done screw in air fuel mixture screws all the way and turn counter clockwise out 3 full turns to fire it up then adjust ...
...cleaner having installed the piston spring in the car top incorrectly. Put everything back to the stock settings (air screw). Double check the intake boot for cracks or separation. The problem is ...
air cleaner You need to service the crankcase breather system. Basically, this means taking apart and cleaning all the goo out of the area where the crankcase breather tube goes into the air box. Also
...cleaner spray and spray it into the air intake as it is running until it clears up. if it wont clear up, you will have to have the carb rebuilt. The choke is bypassing the plugged jets inside of the ...
...cleaner to clean the inside of the needle valve seat.To make sure your float is not staying open and flooding at low rpm, place the float in a small container of gas. If the float sinks,it is bad and ...
Question about Suzuki DR-Z 125 Motorcycles
...air cleaner hooked up right now and it still will not run. I also put on a clear gas filter and can see that there is fuel going to the carb. Any Thoughts? check that reed valves not sticking and ...
...get a can of carb cleaner so when you have it apart you can spray it to clean. also if you spray a squirt of quik start in the air filter just before you kick it if it has spark it will try and
Question about Suzuki DR-Z 125 Motorcycles
...air. the reason it will run on choke is that you have richened the mixture, and could be masking the above problems, if you clean the carb, pour the fuel from the float bowl into a clear jam jar so ...
41 questions posted
Usually answered in minutes!
35 Questions
11 Questions