Is there a diagram for fuel lines? I have a hose that is not attached to anything and I cannot find the end it's supposed to be connected with. Any ideas? ...
Question about Suzuki VL 1500 Intruder LC Motorcycles
Hello my 2000 intruders battery wont hold a charge for anything. I just wanted to know how do i remove the battery. disconnect the leads . remove the safety ******** the battery . now install the new ...
...a bare wire touching the frame. Start with the battery connections, make sure they don't touch anything. Also check the connections to the starter solenoid and the starter. If it still blows,
Question about Suzuki VL 1500 Intruder LC Motorcycles
...When the starter button is pushed, the starter drags and the bike will not start. would this have anything to do with the electronic box on the left side of the frame. check your decompresson
Question about Suzuki VL 1500 Intruder LC Motorcycles
...If you have a portable volt meter, you can clamp onto the battery terminals and start the bike- anything under 13 volts indicates a bad component in your alternator. Best of
Question about Suzuki VL 1500 Intruder LC Motorcycles
...tap on the starter with a plastic hammer and the starter works, you need new starter brushes. If anything else in the starter is keeping it from working you need a new starter , the starter parts ...
...it Might be as simple as re-seating the plug to the gauges. I'd certainly try that before tearing anything else apart. Not hard to get to. Remove allen bolts under gas cap cover and 2 on front of ...
...ambient temps (normally about 15-30 min). We've had it checked by Suzuki techs, but they can't find anything wrong. Any thoughts? The starter may be dragging when hot. This is caused by an internal ...
...so they go up and down freely also make sure u dont have the wrong oil in as alot of people stick anything in them if it has semi oil or fully synthetic the clutch will slip and not work at a high ...
...on? It also has previously hit a false neutral between 3rd and 4th gear, I don't know if that has anything to do with my current problem or not. Is it possible it's just low on some fluids? You
121 questions posted
Usually answered in minutes!
131 Questions
113 Questions
40 Questions
22 Questions