2002 Suzuki VS 800 Intruder "spark plug" Questions

...unless the socket port is not big enough to grab the spark plug It's either 18mm or 5/8's make sure it's a spark plug socket or it won't have the rubber insert used to grab the plug once it's

spark plug on suzuki intruder 800 07 plate change spark plug if it has chrome covers on it, just remove the securing bolts and you can remove chrome covers then remove plugs. make sure the plug colour

...spark plug and then put it back in the plug wire. Make sure that the spark plug is grounded by placing the threaded portion on the cylinder head fins. Now you can crank the engine over and watch for ...

...socket size do i use to take out spark plugs 18mm deep well plug socket is too thick to use inside the head I use an 18mm thin wall socket, the regular socket is too thick to fit in the socket ...

Spark plug gap for dpr8ea I am replacing sp with new spark plugs You can easily look this up on line at the NGK sparkplug site. Global Denso also has the info for cars and motorcycles. (The OEM ...

ONLY FIRING ON ONE CYLINDER Check: spark plug spark plug cable coil Also, it would help to know if this is all the time or intermittent.

how many sparks plugs are their i only see two The suzuki 800 is a V-TWIN CYLINDER. There are 2 spark plugs...

...spark plug is wet when you run the bike. If it is then your spark might not be strong enough. this could be a bad coil or ignitor. If your plug does'nt get wet then clean and rebuild your front carb. ...

After changing the spark plugs, and riding the bike for about10 minutes, I heard a back fire , and the bike started smoking, and gasoline leaking throught the tail pipes. Could it have been that the ...

...makes the starter grunt and not turn, your rings may have seized to the cylinder walls. Take the spark plugs out and spray inside the cylinders with WD-40 or squirt some Marvel Mystery Oil into