2002 Suzuki GSX 600 F (Katana) "gear" Questions

what would cause my 1996 GSX750F KATANA not to shift into 3rd gear all other gears work fine? damaged selecter or gear can cause this

I recently bought a 1994 GSX600F Katana, and it slips and grinds in second gear. It also stalls when I try to put it into first. it only starts in neutral, and not in any gear even with the clutch ...

my second gear pops and grinds when shifted into, but shifts with ease threw all other gears. it sucks because second is my power gear and gets used often. could u let me know what u think. also my ...

my 1988 katana is stuck on 2nd gear what do i do? it jumps back on 2nd gear bent selector or damaged gear cog either a very major diy job and total engine strip if this is your choice you need to be ...

...may have a shift fork or two starting to go bad. When a fork gets bent, it does not move the slider gear properly. When that happens, the slider's gear dogs don't engage fully into the slots ...

No second gear I have a 92 suzuki katana 600. An over-tightened chain left me without a second gear. I've removed the eng and am about to split the trans. I think I need to replace the 2nd drive gear,

gear disengaged on 2nd gear I have a kawasazki zx6r 2007, i was trying to wheelie in second gear and all of sudden my rpm just shot up as if i had shifted into neutral. my 2nd gear is now also ...

My bike starts and idles in neutral, but when i shift to first gear the engine instantly dies. I think it might be a clutch problem. What is your advise? You more than likely have an issue with the ...

...got it trying to find neutral or at least the light is not coming on. was dry running through the gears light went off will not come back on, what do i do. Possible that the switch within the gear ...