Question about Suzuki GSX-R 1000 Motorcycles
...rear brakes. the pads are good and theres plenty of fluide. ive tryed bleeding them and the pads still will not engage When you bleed brakes make sure bleed nipple is pointing downwards and the whole ...
...rear brake pads... Loose rear brake pads On most if not all brake calipers there is a spring plate that keep tension on the brake pads from rattling.Also when a brake job is done silicone is applied ...
...rear of the motorcycle, install the new pad and install but do not tighten the pad pins, then pump the rear brake pedal to move the inside pistons out until they they contact the inside brake pad, ...
Question about Suzuki GSX-R 1000 Motorcycles
REAR BRAKE DISC HAS 8 VIBRATION BUSHINGS THAT ARE LOUSE. Hello Dale, this is an easy job on your bike. Use a flat head screw driver and remove the brake pad cover...it will pop off. Remove the hairpin
Question about Harley Davidson Motorcycles
rear of motorcycle. THEN install both pad pins through holes in the inner and outer brake pads and tighten them to 180-200 in-lbs which is (20.3-22.6 Nm). THEN pump the brake pedal to move the pistons
89 questions posted
Usually answered in minutes!
59 Questions
46 Questions
47 Questions
25 Questions
23 Questions
