2001 Suzuki GZ 250 Marauder "adjust" Questions

can hear ticking sound around engine Hello jerry...does this "ticking" sound like it is coming from the top of the engine...the cylinder head area? You can take a short piece of hose, like a heater ...

Using a feeler gauge what would you set your exhaust valves to on a 2003 Suzuki gz 250 Hi, Wayne valve clearance (when cold): IN. : 0.03-0.08 mm (0.001-0.003 in) EX.: 0.08-0.13 mm (0.003-0.005 in) For

how do you inspect valve clearence and adjust the valves??? how do you check and adjust the valves??? the owners manual says to inspect the valve clearence but dosent tell you how. side note: is there

bike loads up with too much fuel after it warms up fuel level is good choke seems to be working good. Sure it has choke? Could be injecter clogged Fuel/air screw may need to be adjusted clockwise. ...

hard starting & idleing problems and a hard starting & idleing problems and a possiable head geaket leaking have you adjusted and cleaned the carb/s? if the head gasket has gone then it will ...

...loose. Either way you need to sort out the problem as a broken chain at high speed is no fun. To adjust the chain, loosen the rear wheel and turn the adjusters to tighten the chain until you have ...

...or engine case-getta clymer manual for details sounds like its bogging to me, clean the carbs and adjust them accordingly lean bikes are prone to bogging under

...too, to replace the spark plug and set the gap to the specs of your bike's engine and check and adjust accordingly the valve clearance. Hope this

2003 Suzuki Gz 250 will do nothing when trying to start. My Girlfried and I were out riding when her Suzuki GZ 250 backfired twice and shut down. Now when I hit the switch it does nothing not even a ...