Question about Suzuki VL 125 Intruder LC Motorcycles
how do you remove petrol tank from suzuki 125 v twin i am trying to free the choke cable from carburetta end as it is siezed { won;t budge] Had the same problem, had to cut the cable and use WD40 and ...
Question about Suzuki VL 125 Intruder LC Motorcycles
...seat, removing the nut on the seat hinge, removing the bolts from the seat spring support bracket, (the seat hinge and seat spring support bracket must be installed in the same position in either a ...
Question about Motorcycles
...seat: If you're removing the rider's seat for maintenance or customization, store it in a safe and clean place to prevent any damage. Remember that the procedure may vary slightly depending on the ...
Question about Suzuki VL 125 Intruder LC Motorcycles
Removing the seats on a suziki vs800 intruder I have a 2000 vs800 intruder and can't get the seats off. Can u explain to me how to remove the seats? there are 2 bolts under the front area of the ...
removing seat for batter accese The bolt in the center of the rear fender, just behind the passenger seat is the key to removing the seat assembly. If you remove the bolt, then pull the seat upward ...
...seat by removing the single bolt behind it. Remove the seat by lifting it up and back 2- Remove the front (driver's) seat). Remove the two bolts behind it and remove the seat by lifting it up and ...
Question about Suzuki VL 125 Intruder LC Motorcycles
removing the seat of V-Star 1100 Classic 2001? I'm wanting to add a gel bag inside the saddle seat but can't figure out the best way to remove the seat? Any advice? is this just the seat itself or the
Question about Suzuki VL 125 Intruder LC Motorcycles
How do I remove the front seat from my honda shadow aero? there are 2 bolts on the side rail near the back end of the seat - remove them they require a large hex head driver (if the seat is a 2 pc ...
Question about Suzuki VL 125 Intruder LC Motorcycles
...seat off, removing the battery is pretty easy. A rubber strap holds the battery down; unhook and remove it. Unscrew the lead wires and unhook them (negative first), then pull the battery out. Install ...
seat removal First thing remove the screw holding the passenger seat pillion. Next remove the 2 mounting screws that hold the riders seat. Once the screws are removed you can pull the seat toward the ...
21 questions posted
Usually answered in minutes!
29 Questions
28 Questions
21 Questions
2 Questions