2000 Suzuki GSX-R 600 "clutch" Questions

WHen I pull the clutch lever in on my 2008 gsxr600 the clutch will not inguage. I have adjusted both ends of the cable. Could this prevent it from not starting? hi prock, you have a possible problem ...

how do i fix my handle for the clutch cause it got very loose and it doesnt even go back up once i squeeze it, i cant even change it to gears and i tried tighten the little knob where you can loosen ...

...normal way, but the bikes engine/exhaust revs as if it's doing 13k revs + and accelerates like the clutch is being pressed and then slowly released (you can hear the sound the bike makes). In actual ...

I recently purchased a new 09 GSXR 600. Everything is fine except the clutch lever seems too tight.Tight enough where it causes my hand to cramp after short rides around town. Is this normal? Any ...

how do i replace my clutch kit. i burned it out i need to know how to replace the clutch kit on my bike. its a 2007 gsx-r 600. i dont want to pay for a labor. so i rather do it and learn my self. ello

...i just finished painting and polishing the entire bike. The problem i'm having is when i engage the clutch with the kickstand up and put it in first gear it turns off. I checked the sidestand switch ...

...steps do you use when installing friction plates on 19998 srad well first you have to remove the clutch cover, then remove pressure plate and remove old clutch plates. keep old plates in order you ...

I have an 03 gsxr 600. I almost want to call it clutch pin I'am not too sure what the part is called so if some can help me with the name of this part I greatly appreciate it. I will explain where it ...

i recently bend my clutch rod at that time fluid was coming out from the clutch rod hole..it may be low because now at a good speed in 6th gear it feels like a its sipping for fluid and starts to tug.