2000 Suzuki DR-Z 400 SE "lights" Questions

Ad

Question about Suzuki DR-Z 400 SE Motorcycles

1 Answer

...but back light is still LCD display is gone. but back light is still there, neutral and signal lights work Treat as for a bad connector - take it apart, spray liberally with WD-40 or CRC and ...

Ad

Question about Suzuki DR-Z 400 SE Motorcycles

1 Answer

when idleing the lights go good but when you rev bike lights dim Follow the leads that exit the crankcase from below carby area and thoroughly check all these connections to CDI unit and Rectifier and

Ad

Question about Suzuki DR-Z 400 SE Motorcycles

1 Answer

Cleaning an air filter I have an ITG Performance filter that I am using in my 748. With the pollen season upon us I'd like to clean out the runners and airbox as well as cleaning the air filter itself

Question about Suzuki DR-Z 400 SE Motorcycles

1 Answer

key on no power batt good 25amp fuse good Boosted bike then no power ,lights anything with key on If you ever have to jump start a motorcycle with a car DO NOT have the car running. Having the car ...

...xjr 1300 electrical fault oil light comes on with headlight xjr 1300 , when engines running and the lights are off , no oil light appears, turn on the lights and the oil light comes on ? Just sorted ...

Question about Suzuki DR-Z 400 SE Motorcycles

1 Answer

When I have my lights off the brake light works (but dim) and the left hand side light comes on. When I turn the side lights on, neither the side lights, or the rear light work, the brake light also ...

Question about Suzuki DR-Z 400 SE Motorcycles

1 Answer

tail lights have brake lights,but no tail lights The simplest thing it can be is light bulbs. there are 2 elements in the rear light bulbs. one for brake lights and one for tail lights. The tail light

brake light wiring diagram for a suzuki motorcycle how to wire brake lights on a motorcycle Stacy, Check the attached links,instruction and guides on motorcycle brake lights diagram. Good luck. "I ...

Question about Suzuki DR-Z 400 SE Motorcycles

1 Answer

...bulb are one and the same; this usually means that the bulb has two filaments; one for the tail lights and a second filament (brighter) for the stop/brake light. If one filament has burned out, ...

Question about Suzuki DR-Z 400 SE Motorcycles

1 Answer

break light out, tail is ok. New bulb put in. What can we check. Hi, as the tail light gets its supply from the ignition switch, it sounds like you have an issue with either a bad earth on the rear ...

Not finding what you are looking for?
2000 Suzuki DR-Z 400 SE Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...