1994 Suzuki GSX-R 750 WR "turn idle" Questions

...turn choke off idle doesnt change While pulling up on choke see if there is anyone movement at carbs. If not then choke cable is broken. One final test 1st. Find air intke. It should be under your ...

...having isssues where the bike starts but i need to keep the throtle on in order to prevent it from turning off That sounds more like a carb float issue or a low jet clogged up. Does it idle smooth ...

...turn the choke down. Tried to adjust the idle screw beneath the carb filters I believe. Now all she does is turn on. Wont even turn over or start, where did I go wrong and what should I do before I ...

...idle beautifully with a gravity tank. Then the fuel pump crapped out. I replaced the fuel pump, but not the pet-****. The bike ran fine, started just fine. I drove it 50 miles, all the while noting ...

...no idle? Turn the screw back where it was (1 full turn) and then screw it OUT 1/2 turn, then if not, another 1/2 turn. Once you have the mixture correct, the idle speed can be set with the IDLE

...turn the handle bars left or right the idle speed goes up?? http://www.bikebandit.com/1994-suzuki-vs1400glp-carburetor-rear/o/m139273sch259338 This is the REAR carb. Item #42 is the idle speed ...

...it down to approx. 1000rpm's. My problem is that I don't know which screws to turn down the idle. And if I turn down the idle, will it mess up the tune up and the way it runs. back off the idle ...

...it will setttle down a bit but still idles a little high for my likeing. is there a idle adjustment screw. thank's Dave Yes, every carburator hase idle screw. Turn it to left tu turn down the

...vacuum leaks and the idle screw is turn up. Then adjust the a/f ratio screw to highest idle, turn down the idle screw and repeat until a/f screw makes no change. At that point you set your idle