rear splash guards How easy would it be to shorten/remove the rear splash guard for appearance reasons only? Remove, shorten, replace. Do not just remove. Or, there is a pre-shortened (invisable) ...
...the thing to do. It will probably take a few days for the dripping to stop. The cylinder walls are splash lubricated. Too much oil lessens the splash. Chances are that little or no damage was done. ...
fuel gague going up and down strangely Why would my fuel gauge be going up and down and up and down on a relatively flat road? Fuel keep splashing around but you change the fuel sensor it will be fine
rear splash guard for suzuki boulevard c50 need a new splash guard. Where can I get one? ebay
I am having an oil leak and don't know how to go about fixing it. It starts as soon as I start riding the bike. It is coming from the left side of the bike and sprays on my pants on my left leg Well, ...
...more oil but don't add more thinking that would be better. The cylinder walls get lubricated by splash lubrication. Filling too full kills the splash and limits lubrication. Use 10w40 motor oil. ...
...anything when you push the start button, your starter relay is probably bad. It's located on the splash guard in front of the rear wheel. It's a plastic cube like device riveted to the splash
...(if you have one) can not pump the air filled oil. Result: no lubrication. If your engine uses the splash system, you will be splashing foam, not oil. result: poor lubrication. Recommendation: do
...else. The cutting out is just a coincidence. Go with the correct amount of oil. The piston is splash lubricated. Too much oil kills the splash and the cylinder gets poor lubrication. If your ...
...get less lubrication. This sounds counter intuitive but the reality is that the cylinder walls are splash lubricated. There is a protrusion on the rod cap that is designed to splash oil onto the ...
15 questions posted
Usually answered in minutes!
13 Questions
10 Questions
9 Questions
9 Questions
8 Questions