1992 Suzuki LS 650 Savage "bolts remove seat 2002" Questions

remove the rear seat to install saddle bags on my 2002 LS650 / Suzuki Savage? A bolt is underneth the driver seat at rear. Hard to see. Maybe pull off driver seat first the rear seat - be sure you are

...remove this bolt will give you access to the hold down bolts located on the rear fender for the split seat model, if your seat is not split, just removing the 1 bolt located in the compartment will ...

...does the seat come off? I think on this model you just pull up on the back corners of the riders seat to expose 2 retaining bolts. Remove the bolts then pull the seat up and back to remove

...the passenger seat, remove smaller seat. You can now access the slightly larger bolt from the rear of the drivers seat. After removing the bolt slide the sear forward approximately 1 inch and lift ...

...remove the seat on the 2002 honda shadow ace delux to change the battery First, remove the passenger seat; one bolt behind it anchors it to the fender; then lift the back end and push against the ...

driver seat, lift the back of the seat, and pull it toward the back of the seat. Remove the bolts on the battery cover, the battery cable bolts, and lift the battery straight up out of the battery box

...remove the seat. The seat should have a tab on back with one bolt. Remove bolt pull back to release front of seat from tab.Before you do check for wiring that pulls out from under seat on left? side ...

...remove the seat. First, remove the passenger seat by removing the bolt behind it that secures it to the fender, then lift the back of the seat, and push it forward until the front bracket is ...

remove the seat on my honda 600 vt shadow 2002. I want to reach the battery, to charge it? remove the passenger seat - then find and remove the left and right rear bolts from the driver seat to remove

...2002 come of help , couch. you use the key to remove the rear seat and once thats off there is a little bracket that is bolted that holds the front seat on unbolt and then you can remove the front ...