1991 Suzuki GSF 400 Bandit "leads" Questions

fitted taylor leads to dynacoils engine will not fire 650 bandit So you've Fire at coil Hi tension connection but not thru New leads from taylor So check leads and plug caps seperatley

suzuki gsxr 400 gk76 which ht leads go where from coils after fitting new engine can,t seem to find right positions for leads Hi and welcome to FixYa, Almost always on Suzuki 4 cylinders, the left ...

...could it be? What shell I check? Thanks for your help Had a similar thing on mine and it was the leads breaking down. Bought new leads and plug tops. Probably need to go to an independent ...

I'm trying to get my Bandit GSF400 started again, it just wont fire, I think the HT Leads have been swapped around by someone attempting to help but they dont have any numbers on them so I can'

where do ht leads go from coils on my gsxr 400 gk76 Hi again, It would seem you posted twice, please your other post.

what order do the ht leads go on a gsxr 400? This should help >

whats negative and positive on ignition coils The positive lead in the one going into the coil . The negative is the one grounded or shown bare on the outside of the coil.

suzuki GSF400 cranks but no fire kid hooked it to the car, now cranks but no fire. Any hints? either it is not getting spark or not getting gas FIX First check for any fuses etc Make sure lights come ...

...red one coming out of it to the starter. it you put a screw driver across the 10mm nuts on the leads at the relay yep it will flash, the engine should turn over. if nothing happens tap the ...

...side.Attach black lead to AC lead, Attach red lead to rectifier ground lead 0.3V-o.8V check all AC leads .Reverse the meter lead hook-up all rev-bias should read OFL if any of your readings are not ...