1990 Suzuki DR 650 RS "wheel" Questions

THE FLY WHEEL WONT TURN WHEN I TRY TO START THE BIKE IS THE STRARTER CLUTCH BEHIND THE FLY WHEEL WORN. IS IT A BIG JOB TO REMOVE THE FLY WHEEL If you hand-turn the flywheel, and it fails to turn, it ...

...be slipping a bit. Finally check your brakes. Left each end of the bike off the floor and let the wheel spin. They should spin freely, at a consistent rate, and hardly slow at all. If there is ...

how do you ajust rear wheel so it is alignedright? 1.loosen the bolts on either side of the bike at the rear of the frame. this is what allows the back wheel to be adjusted. aka wheel adjusters. ...

how do you disconnect the rear wheel on a 1990 CBR 600 as in remove?if removal easyest way put on centre stand slacken chain adjuster nuts,then slacken wheel spindel,push wheel backwards so chain ...

i have a puncture in my front wheel of my Suzuki FXR150 2001 i have a puncture in my front wheel of my Suzuki FXR150 2001 and i need to know how to take the front tire off the bike Lift the front ...

How to remove rear wheel that is mounted on a 94 dyna wide glide harley Simplified version: Get rear wheel off ground. Remove rear belt guard, if equipped. Loosen axle adjusters. Loosen Axle nut. ...

how to remove rear wheel on a 1981 650xj yahama hi m8,,undo the wheel spindle nut ,,tap the spindle out of the swing arm,and untill the spindle is out of the wheel,, then undo the rear brake at the ...

trying to remove rear wheel I need to remove my rear wheel? Raise the rear wheel off the ground making sure that the bike is properly supported and will not fall. Remove the nut from the end of the ...

1999 kawasaki kvf 300 rear wheels siezed Is it the wheel bearings or is it the transmission? You will need to raise up the back of the bike to see if the wheel spins. Check the gears are in neutral. ...

i need to know rear wheel spacer placement. also where to rreference to align the rear wheel. it seems i have un equal space between the wheel and fender. i have a total of three spacers two on the ...