...centre stand loose, damper 'topping out' or exhaust loose but no. Have pulled wheel like checking a car wheel bearing while on stand and there is a small clicking/play felt. Does this sound a normal ...
centre stand hold wheele on tyre 6 clock and pull with one hand and push with other hand)and see if you can feel eney play in the bearing,if so replace,also with bike still on back wheele spine wheele
Question about Suzuki GSX-R 750 K Motorcycles
centre stand, undo the top nuts on the forks with a socket but becarefull when you get near the end as the spring will try to shoot up,keep you weight on it, withdraw the spring slowly making sure you
Question about Suzuki GSX-R 750 K Motorcycles
...centre stand,have someone push down on the rear taking all weight off the front tire, and push the tire assembly in and out.There should be absolutely no play in the wheel assembly or headstock. The ...
...way put on centre stand slacken chain adjuster nuts,then slacken wheel spindel,push wheel backwards so chain becomes real loose....undo wheel spindel fully tap wheel spindel out wheel should slide ...
...centre stand and loosen the axle nut then the rear wheel alignment adjusters , so the chain is loose ,,, then lift the chain off the rear socket and then the front sprocket then remove the nut and ...
...centre stand and tilt it so the back wheel is off the ground. With the engine OFF spin the back wheel by hand. Watch the outside edge of the wheel rim to see if the rim is damaged, bent or warped. ...
...stand, suport the front of the machine so you can turn the steering freely from lock to lock and geting a feel for how tight the bearing is before adjusting or even undoing the top nut, grasp the ...
35 questions posted
Usually answered in minutes!
329 Questions
228 Questions
165 Questions
158 Questions
169 Questions