2008 KTM 530 EXC-R "chain" Questions

Hi, how do I adjust my cam chain tensioner as it is quiet noisy again and dont have chance to get it serviced before 7 day ride thanks how to adjust cam chain on a ktm 530exc with manual adjuster

...4 times the exhaust cap fell off 4 times the kickstart fell off 1 time the headlight went out twice chain gaurd broke 1 time it wrecked the back tire . i asked the head of cs at ktm to take the lemon ...

im having discover 135cc, an i want to remove the chain cover an put the chain strep, will it damage thr chain. The chain cover is there to protect the chain from collecting dirt and and to save ...

how do u know if your chain is worn out or if it how do u know if your chain is worn out or if it is the front sprochet the rear spocket looks fine . the chain seems to jump alittle bit. Unhook the ...

chain length I want to order a new chain for my CBR 600 RR. What size do I need? For a honda 1999-2000 CBR600 you will need a 108 chain link. This is the standard link considering your front teeth has

chain Should I also use a chain lube after using wd40? The answer depends on whether external chain lubrication is beneficial for a chain with internal grease sealed with o-rings and perhaps how often

chain is sticking to back sprocket and making my bike **** when i accelerate my chain went slack so i tightened it now i have to keep tightening it as the chain just hangs so low but my back wheel can

How easy is it to fit a cam chain and link in sit to a Honda CB 750 1994. and what is the main problem with a rattling chain on one? is it mainly the chain for the cam, or the lower drive chain for ...

how to u put chain on r6 If the chain has a master link, then you can just loosen the rear axle and let the chain tension adjustment all the way in. Then wrap the chain around both sprockets and ...

I tightened my chain on my 04 r6 and after I tightened everything back up I can barey roll it in neutral when I'm sitting on it. Can you over tighten the rear axle nut? YES, and you set the chain ...