2004 KTM SX 125 "cylinder" Questions

...piston on ktm 85? I am replacing the whole kit and am trying to remove the piston from the brake cylinder. a compressed air hose will do it, just make sure it is wrapped in rags to catch the

...somewhere to a total piston seize. You're going to at least have to pull the head and probably the cylinder to find the

No top-end power. I checked the compression of the cylinder and I only got 39 psi. I know you're supposed to check it while the engine is warm, but I didn't have that option, so I checked it cold. ...

...remove engine from the frame. Then remove flywheel,rt hand cover ,clutch, crankshaft gear,head,cylinder,reed cage,shift shaft. Then the crank cases can be split very carefully as transmission

oil around the plug at the top of the head, its caused by blow by on your piston, pull the head and cylinder and check your clearances, starting your bike and running it cold will wear the piston down

...get free instruction/diagrams, and what should I expect?? indicates that the clutch cable or slave cylinder need adjustment as the clutch is not fully ...

...installed it and checked to see if it is getting fire. It is and I know that fuel is gettimg to the cylinder. The bike is fully automatic, so how can I pull start it? Or can that be done? take the ...

how do i no if i need my pisyon cylinder re-board or just cleaned as there is some light scratching in it ,and if i do need to grt it re-board what size will i re-boar it too. thanks for your help The

...toque. Most aftermarket pipes work on the to end of the power range. Or You would need to have the cylinder