2008 kawasaki KLR 650 "clutch adjustment" Questions

clutch doesn't engage until lever is almost completely out try slackening adjusters each end of cable

...clutch engaged or not.put in neutral still makes the noise until i roll to a complete stop..it took the bike in for valve adjustment and the tech told me they were in specs but he made no notes.he ...

...adjustment is correct, tighten the clutch in-line cable locknut and slide the rubber boot over the cable adjuster. 10. Install the clutch inspection cover quad ring onto the primary chain case ...

...adjustment is correct, tighten the clutch in-line cable locknut and slide the rubber boot over the cable adjuster. 10. Install the clutch inspection cover quad ring onto the primary chain case ...

...clutch rod adjustment Slide the rubber boot away from the clutch cable adjuster. Loosen the cable locknut and turn the adjuster to provide as much cable slack at the clutch lever as possible. Support ...

...adjustment at the clutch lever Remove: - Left Side Cover - Clutch Adjusting Cover Loosen the locknut Turn the adjusting screw in until it is lightly seated - Be careful, the screw will keep turning ...

clutch lever and make the adjustment there as needed to get the clutch wear you want it, if the clutch is slipping you may need to have the clutch replace. try to adjust but if the adujster is all the

...clutch adjustment is made at the handlebar. Turn the adjustment screw on the handlebar out until the clutch lever has about 1/8 inch of movement (before any tension is felt on the clutch ...

How do i adjust the clutch on my 2004 Harley Davidson Heritage Softail Manual says back out clutch adjusting screw 1/2 to 1 full turn. When I do this and then set the handle adjuster as per specs the ...

clutch being out of adjustment. Start by loosening the clutch cable at the midway adjuster. remove the derby cover, (over clutch), which will expose the clutch adjusting screw and nut. Loosen the nut,