front wheel alignment on 2008 250r I dropped my bike yesterday and now the wheel is about 2 degrees off on my steering. How do i straighten this. Im very new to riding. just loosen then re-align front
Question about kawasaki Ninja 250R Motorcycles
droped bike handelbars r straight and front wheel is slightly turned 2 da left You need to loosen and re-torque the fork triple clamp bolts, along with the front wheel axle, and pinch bolts. Do this ...
Need front wheel disc as the disc has bend for Ninja Kawasaki 250 R 2010 model Ebay will put you in contact with loads of Kawasaki dealer.
Question about kawasaki Ninja 250R Motorcycles
...wont rev up. take the choke off and it dies?? Any ideas? make sure that you take a peice of a wire wheel off and run it thrugh your jets if that dosent work im not sure if the needle valve has a ...
...FixYa. Hmmm, check to see if the brakes, or something in the drivetrain (i.e. chain, sprockets, wheel bearings), are binding slightly when it gots hot out. I have seen brakes bind or hang when ...
Question about kawasaki Ninja 250R Motorcycles
...cable broke, how can i fix it myself?i have a 2002 250 ninja Unscrew the connector at the front wheel. If you can reach the connector under the speedometer unscrew it. If you can not reach it you ...
...bikes but can you tell me if the garage would have neede to take this off before putting a new wheel on ??? the stud has bent is it ok to ride ??? Please provide a
were dose the speedometer cable go follow it from the speedometer if you can... it goes to the front wheel normally
Question about kawasaki Ninja 250R Motorcycles
...in the body kit, cracked boot, mirrors have been removed, the throdle gets stuck and the front wheel is wobly so how much is that to fix approximatly without goin through insurance? Your looking ...
261 questions posted
Usually answered in minutes!
8 Questions
5 Questions
2 Questions
0 Questions
2 Questions