2008 kawasaki Ninja 250R "replace high beam light" Questions

high to low beam, light worked but tail light quit working and instruments lights quit and then all came on and all worked properly. Just got this 08 ninja 250r. Always has started and not stranded me

...them? They are the same. It is one bulb with two separate elements high and low. You have to replace the bulb. kind of hard to explain how to do it though. Purchase a shop manual. You won't be

...high beam passing lights go out(should they go out when high beam is on?) I`m going by an 2002 wire diagram but don`t know if it is same as 05. Could the TSM cause this? Thanks- No, the TSM does not ...

turn signals not working. high beam indicator light not illuminating however high beam does come on. check fuse for signals,check for one bad bulb! replace bulb for high beam indicator!

high beam shuts off when on for a long time ford ed falcon Hi i have a 1994 ford ed falcon. everytime i use the driving lights they work fine but when i turn them on high beam they flicker then shut ...

...high and low beam, the low beam works but when I switch from low to high the light goes out. I replaced the bulb with bulb from Honda dealer but the same results. bad electrical contact in the ...

high beam fuse? 2002 fxdl no power white wire high beam on dash indicates high beam is on still no power Lighting fuse but no separate high beam fuse. What was happening prior to this problem. Was ...

high beam to work . The problem seem to come where the yellow wire goes back to , but I don't have a manuel. I even took a jumper wire on the switch , got low but nothing from the yellow hight. thanks

...replace my front light,sporter harley 2007,now the light came with 3 wires, and the cycle have 4 , how I can connect, What color are the wires from the light and from the wiring harness? If there are ...