2008 kawasaki Ninja 250R "marker light turn signal wiring" Questions

...marker light (two wire,purple and black) rear You'll have to replace the single filament turn signal unit with a dual filament unit and wire the brake light to one filament and the tail light to ...

...turn signal bulbs on bike with singal filliment bulbs and cut the wires off taped them up that made the marker lights stay on You might want to inspect the wires you tied into for the mirror signal ...

...marker lamp housing, and wiring I don't know what you're driving - or the bulb number - but many vehicles make use of bulbs that have two elements. The first is the "running light" and the remaining ...

...marker lights quit working along with brake light. More information would be helpful. Do any lights work, ie signals, four ways. Does rear brake light work and just not light when front brake is ...

...turn signal from stock to after marker not enough wires we are trying to change front signal lights on my suzuki m50 and the after market ones i bought only have to wires and market one has 3 for ...

...light, or marker lights but turning signals work Start off by checking all your bulbs and fuses, sometimes one burned out bulb will affect other lighting systems. Next thing I'd do is look for a bare ...

...light goes off 1) Blown bulbs sometimes cause this. 2) Check the fuse & blinker relay. Some bikes have different fuses for marker & blinking, even though they're in the same lamp. 3) It could ...

...turn signals stay on as marker lights fine. Switch is good ( Checked continuity with an ohm meter), bulbs are good, connections appear to be good. Is it the flasher module- is there a quick test that ...

marker lights, tail light and front turn signal running lights. can't find bare wire anywhere. Keep blowing fuse for running lights on trunk, fender marker lights, tail light and front turn signal

MARKER LIGHTS. WHERE ARE THE RELAYS FOR THE LIGHTS I've never heard of a headlight relay but most bikes do have turn signal relays...but when my low beam went out it was because the filament burnt out