2008 kawasaki Ninja 250R "front" Questions

droped bike handelbars r straight and front wheel is slightly turned 2 da left You need to loosen and re-torque the fork triple clamp bolts, along with the front wheel axle, and pinch bolts. Do this ...

need to remove front tubes front tubes bent and machine shop wants the tubes removed from shock ,need diagram to help disassemble. try here for exploded view ...

how do i remove my ninja's front signals? You have to partially remove the front fairing. Unbolt from the fuel tank and remove the uppermost guards and try to reach inside to access.

...including the single shock UNI-TRAK® rear suspension system. 5• Stainless steel disc brakes front and rear. Balanced Actuation front brake caliper for consistent wear and performance. 6•

were dose the speedometer cable go follow it from the speedometer if you can... it goes to the front wheel normally

how to remove front fairing 250 kawasaki ninja 2007 there are small allen bolts or lock screws.. take them out and it should just come off

how do i change the air filter on a 2008 kawasaki ninja 650 r Remove front seat. Remove tank. Open airbox and slide the filter out of its groove.

front wheel alignment on 2008 250r I dropped my bike yesterday and now the wheel is about 2 degrees off on my steering. How do i straighten this. Im very new to riding. just loosen then re-align front

...I just got done riding and I parked. I thought that the lock position on the ignition would lock my front tire. So I turned the bike off and moved the key to the locked position. I tried to pull out ...

...should I use to run comfortablly at 75-80mph? you can change the sprockets.If you go to a 16 tooth front sprocket. two teeth on a front sprocket is like droping 4 teeth on the rear. You could drop 2 ...