2006 kawasaki KX 450 F "cylinder" Questions

...my 07 kx 450. I took the plug out and rolled the motor over to make sure there was no water in the cylinder (a little water blowed out). I put everthing back togather and tryed to start it, it tryed ...

...cams it should be after the inlet valve shuts and goes on the firing stroke just put a rod in the cylinder and see if the piston reaches the top off the bore when the magneto is at tdc then its

...a piston is badly scored it needs to be replaced. The scoring can stop the rings from sealing the cylinder. Do this; drain the oil then fill the box to the proper level. Wash the bike to rid it of ...

...the timing should be set as follow have the piston at bottom dead centre by putting a rod in the cylinder and have the exhaust valve just close as the piston is at bottom dead centre then as it ...

...out if not you will have to split the cases. The rest is no big deal as long as you know where # 1 cylinder is and the cams are installed so the valves work you set up on # 1 and every should fall ...

Only running on the number 1 cylinder and 4 cylinder My bandit 400 when idling is only running on the number 1 cylinder and the number 4 cylinder but when you give it gas it seems like it runs on all ...

...turn , not enough power. How can we fix that If the piston is seized up you will need to remove the cylinder head, the the cylinder, then the piston. Tank the cylinder and piston to a dealer and have ...

...1200 thats kinda hard to start dosent want to idll it olso dosent want to idle , it seams like rear cylinder quits how ever at above 1700 rpms it runs fine but sputers from time to time on rear ...

cylinder jug I have a 93 RM 125. what years can I use the cylinder off of? Also can I use a RM 250 cylinder? If so what years? No! you cant use 250 cylinder on 125. i think 93-96 have the same ...

1200 sportster not running on back cylinder When cranking the motor the front cylinder fires up and runs the back cylinder is not running. I have checked the spark plug and it is firing. checked the ...