...edge of the flywheel, it lines up to a pointer or slot in the small hole. with this lined up, the valves should be closed and there should be a mark on the camchain wheel bolted to the cam, that ...
...PLUG/S AND LOOKING IN THE COMBUSTION CHAMBERS, PREFERABLY USING A FLEXIBLE INSPECTION CAMERA. YOU WILL SURELY HAVE TO REMOVE THE CYLINDER HEAD/S. YOU MAY LEARN SOMETHING WHEN YOU PULL THE VALVE
Question about kawasaki KLX 110 Motorcycles
...valve cover, exhaust headers, remove valve cover (place somewhere you won't step on it) remove cams(i'm sure theres a right order to take them off but I never really had a problem with taking ...
...cover. remove the spark plug caps and valve covers. Put 17mm socket into the front of the motor and rotate the crankshaft counter clockwise and align the "TL" mark on the rotor with the pulsar index ...
...cover bolts and removing and replacing after adding new gaskits. No, that's just about it. Replace the breather valves in the rocker boxes while you have them off. They're just rubber parts very ...
...valve cover nuts and bolts BEFORE you remove the covers and BEFORE you remove the spark plugs. This prevents the potential to loose them down in the engine, which is a whole other problem. The ...
...valve covers. Remove the round timing inspection cover from the top left hand side of the crankcase. On the rear of the engine, on the left side, is another round cover to remove - this gives you ...
...valve cover and work down, keeping your top end parts in their grouping ( valve cover with their bolt,cams and cam bolts together,head and head bolts and do not mixup your cam bearing caps ) your ...
Question about kawasaki KLX 110 Motorcycles
...cover. Also remove the four tappet hole covers from the cylinder head cover. Turn the engine (in the normal direction of rotation) and watch the intake valves open - and close, then see that the ...
...cover. Also remove the four tappet hole covers from the cylinder head cover. Turn the engine (in the normal direction of rotation) and watch the intake valves open - and close, then see that the ...
33 questions posted
Usually answered in minutes!
28 Questions
9 Questions
9 Questions
0 Questions
1 Questions