2005 kawasaki ZX-6R "ignition" Questions

slide bike and somehow ignition switch was locked and would not turn to on position. Please help me. keep trying to get it out its a common prob need a new ignition switch

want to remove key ignition how to remove 2006 zx6r ignition you may need a special tool or bit to remove it from the bike. Either way the manual should reveal all..... here it is..>>> http:/

How to change the Ignition switch on a 2007 Kawasaki Ninja Don't know this exact model but most ignition swiches are retained with a hidden grub screw in the switch mount extractable by a Allen key, ...

...are ok bulbs are ok switch ok high beam works parking light works passing light works Check your ignition wiring, normally for AHO bike headlight are connected to ignition

my key ignition will not turn to the off position it is jammed and will not turn in any direction Your only real solution here,is to buy another ignition cylider/switch,..or take it off and take it to

Bike was in an accident, need to replace the ignition switch assembly. Don't know what to do. it's a 2004 kawi ninja zx636 The ignition switch comes as you quite rightly say as a module/assembly. It ...

...over. now i cant find the position. is there a way around this . did u check the wires from the ignition?..if the wires are ok then i think u must change the ignition contact if you need more

my batery is dead how do i take the seat off Try use the ignition key to unlock the seat. Try your side cover under your riding right leg, pull the cover off it may show you the battery and all the ...

how to know if my kawasaki zx6r 2007 have Immobiliser system Look the ignition lock and if it has red ring with "Kawasaki ignitionsecurity system IMMOBILIZER" like on the picture then it hase ...

clicking when i turn ignition 2006 zx636 sounds like a low battery if it is charged the it is dirty connections check from the starter to solenoid to the battery and check the ground wire at battery ...