2004 kawasaki VN 1600 Mean Streak "cobra commander" Questions

...Cobra Power pro 2 into 1 pipes on it. Also a Power Commander USB III. I had it dyno tuned (each cylinder) and the results are Maximum HP 75.01 and 78.24 ft-lbs torque. I'm not sure what it is stock. ...

...commander because of the cobra drag pipes installed by dealer. It misses at all speeds and when trying to maintain the same speed. It sounds as though you have the wrong MAP in thePower Commander. If ...

commander is availible for the bike so that you can tune the fuel curve, it will help with the performance as well as your fuel problem hi your carbs need rebuilt if you bought the bike with the cobra

...Cobra pipes(dragsters) a power commander III and a big air kit breather. I am not happy with the popping sound I get on decel. Most forums with the same problems find their solution in the ...

...commander and cobra exhaust, no place for oxygen sensor. Took off power commander, secondary throttle valves rattle in open position with throttle closed & rattle secondary throttles in closed ...

...cobra speedster exhaust. Had done the same to old bike a vtx 1300 honda but was carb, fairly easy. This bike fuel injected and can find alot of info other than alot of talk of some fuel sensor a must ...

...cobra power commander fitted and i am going to service the engine.as i am going to order filters and i do not have a manual,is it likely that there is an after-market high flow k&n filter fitted ...

...cobra exhaust and a kuryaken pro- r hypercharger for my 1100 classic. Someona at work mentioned i need a power comander to make it run right once these parts were installed. I thought they were only ...

...plugs cleaned air filter. No help. Cobra swept pipes. No power commander. Is this the problem or need new injectors? need to have the injector for that cylinder checked and the tip seal ...