Question about Yamaha Motorcycles
stater on my yamaha 1600 roadstar starter will no engage. i was able to engage once by; bypassing solinoid(sp) and direct from bike + battery to stater. I was able to get home . when i turned bike off
Question about kawasaki VN 1500 Vulcan Classic Tourer - Fi Motorcycles
starter stays engaged Sticking "Dog" the part of the starter motor that engages with the stater ring. Remove Starter motor, check the spring on the dog ( the shaft that comes out of the starter motor)
Question about kawasaki VN 1500 Vulcan Classic Tourer - Fi Motorcycles
...stater and battery in yamaha 1100 and the relay clicks but won;t engage the starter . Charge battery to full, start in neutral, still clicks? Bad ground, or bad connection. Jump starter solenoid with ...
Question about kawasaki VN 1500 Vulcan Classic Tourer - Fi Motorcycles
starter will stay engaged and keep turning over when stater switch is pressed to start bike only way to shut of bike is to dis con battery very hot wirng your starter solinoid is sticking it needs ...
Question about kawasaki VN 1500 Vulcan Classic Tourer - Fi Motorcycles
...won't engage. when i try to start the stater just spinnes. You will need to remove your starter and have a look inside, most bike starters contain " Planetary " gears which disintegrate with use
81 shovel starter is spinning wont ingage. stater spinning when tring to start .hurd noise in pimary/ could chain drive or timeing chain broke probably the starter's engaging gear, or starter ...
Question about kawasaki VN 1500 Vulcan Classic Tourer - Fi Motorcycles
starter turns but will not engage moptor I am comcerned that this may be my starter clutch. Is that possible sounds like the clutch. have you tore down the stater to check everything?
Question about kawasaki VN 1500 Vulcan Classic Tourer - Fi Motorcycles
How do I know if stater is going bad It could drag down a good battery, turn over slowly etc. Could not engage also if the drive is shot
Question about kawasaki VN 1500 Vulcan Classic Tourer - Fi Motorcycles
engage is to bench test the starter. remove the starter and place a ground wire to the frame or housing of the stater and touch a 12v hot lead to the pos post of starter being careful not to let
Question about kawasaki VN 1500 Vulcan Classic Tourer - Fi Motorcycles
...STATER DOES NOT ENGAGE AND LIGHTS GOES DEAD WHEN TURING KEY TO START POSITION If you take a voltage reading at the battery when you are pushing the starter button, my guess is you will have 11-12vdc ...
21 questions posted
Usually answered in minutes!
23 Questions
5 Questions
2 Questions