kawaski zx12r 2003. bike.is unreliable of late. can start it fine and then only travel a short distance n turn bike off n then bike wont start. it has recently had a new battery fitted. my husband has
Question about kawasaki ZX-12R Motorcycles
...great at lower rpm but anything over 7000rpm where the power is it falls flat on its face like the valves are floating?? One other thing the bike on it's first start this year started sounded like
I have 2002 ZX12R, I took all the fairings off to get painted and while I had it apart i had my valve cover gasket replaced cause it was leaking on left front corner, and while I had it apart I had ...
Question about kawasaki ZX-12R Motorcycles
my bike was running badly so i had a plug change my bike felt like it was missing when it was warm up and was running badly so i had a plug change and a full service done and i find the problem is ...
...hi there, this table will help you. I used to own one.. beautiful bikes easy to work on too! Valves: Valve clearance: Inlet 0.13 0.19 mm Exhaust 0.18 0.24 mm Valve head thickness: Inlet 0.5mm
...heats up, assume its piston slap. Is it time for rebuild? Do you recommend to rebuild head as well (valves and seats)? First, let's assume that the valve tappet clearances are set correctly and the ...
Question about kawasaki ZX-12R Motorcycles
what is the valve clearance on 2007 WR 450 F Yamaha valve clearance valve clearance valve clearance Intake valve -0.10mm exhause valve-0.20-0.25mm
Question about kawasaki ZX-12R Motorcycles
...i put in sparkplug hole and turn engine very slow when piston just startes to go back down i adj valves. intake valve 3 thousands and ex valve 5 thousands WHITE IS THE PROPER FEELER GAUGE INLET
I have a 1993 suzuki katana 600, it has high km's. the valves make alot of noise, people say to do re torque the valves, would you know how tight I sould torque them too? Either your friends are ...
Question about Motorcycles
...the spring, replace it and it may be all that you need.If this does not fix it, or if you have reed valves, you must disassemble the motor to reach the head and remove the head. The valve must ...
48 questions posted
Usually answered in minutes!
34 Questions
18 Questions
16 Questions
6 Questions
3 Questions